upload/downlaod file from FTP using AT commands (Sim900 + arduino)


9 Comments  →
   by Dost Muhammad Shah    9 Comments  →

In the previous post I explained how to make a connection and send data via TCP connection on SIM900 and similar modems. This post is going to be about FTP connection. FTP stands for “file transfer protocol.” FTP powers one of the fundamental Internet functions and is the prescribed method for the transfer of files between computers. It is also the easiest and most secure way to exchange files over the Internet.

Without going into much details I would show the related AT commands and brief description. Later I would include sample code for FTP upload/download using arduino and SIM900

AT command Response Description
AT+SAPBR OK Configures GPRS profile.
AT+FTPCID=1 OK Selects profile 1 for FTP.
AT+FTPSERV=”****” OK Sets FTP server domain name or IP address. **** is the domain name or the IP.
AT+FTPPORT=*** OK Sets FTP server port. *** is the port.
AT+FTPUN=”***” OK Sets user name for FTP server access. *** is the user name.
AT+FTPPW=”***” OK Sets password for FTP server access. *** is the password.
AT+FTPPUTNAME=”****” OK Sets destiny name for the file.*** is the name of the file.
AT+FTPPUTPATH=”****” OK Sets destiny file path. *** is the path of the file.
AT+FTPPUT OK Use to put a file into the FTP server.
AT+FTPGETNAME=”****” OK Sets origin name for the file.*** is the name of the file.
AT+FTPGETPATH=”****” OK Sets origin file path. *** is the path of the file.
AT+FTPGET Use to get a file into the FTP server.

Make sure you have a server and note the ftp port, we would consider using the default port 21. Switch on your modem and make sure pin code is disabled or properly entered and that GPRS connection is available.

  1. Configure GPRS by sending AT+SAPBR=3,1,”Contype”,”GPRS”r  .
  2. Set APN by sending   AT+SAPBR=3,1,”APN”,”your apn”r  .replace your apn with APN for your network.
  3. Now set the username and password for the apn (replace username and password with correct values )
    AT+SAPBR=3,1,”USER”,”username”r  .
    AT+SAPBR=3,1,”PASS”,”password”r
  4. Connect to GPRS connection by sending AT+SAPBR=1,1r, when connected Modem will respond with OK
  5. Now select profile 1 for FTP by sending AT+FTPCID=1r
  6. Now set FTP server domain or ip using the command AT+FTPSERV=ftp.yourserver.comr
  7. Set FTP port by AT+FTPPORT=21r
  8. Now send FTP credentials using AT+FTPUN=user_namer and AT+FTPPW=”password”r
  9. To get a file from FTP send AT+FTPGETNAME=file_namer
  10.  Now set the path of the file AT+FTPGETPATH=/path/r
  11. Now send AT+FTPGET=1r and wait for response from server, which starts with +FTPGET:1,1
  12. To upload a file to FTP server send AT+FTPPUTNAME=file_namer
  13. Now set path AT+FTPPUTPATH=/pathr
  14. Now send AT+FTPPUT=1 and wait for +FTPPUT:1,1 after which you need to send the content of file to be uploaded.
RECOMMENDED READ  GET request using AT commands SIM800 SIM900

int8_t answer;
int onModulePin = 2;
char aux_str[30];

char incoming_data[120];

char test_str[ ]= "0000000011111111222222223333333344444444555555556666666677777777000000001111111122222222333333334444";

int data_size, aux;


void setup(){

    pinMode(onModulePin, OUTPUT);
    Serial.begin(115200);


    Serial.println("Starting...");
    power_on();

    delay(5000);

    Serial.println("Connecting to the network...");

    while( (sendATcommand("AT+CREG?", "+CREG: 0,1", 500)
            || sendATcommand("AT+CREG?", "+CREG: 0,5", 500)) == 0 );

    configure_FTP();

    uploadFTP();

    downloadFTP();

    Serial.print("Incoming data: ");
    Serial.println(incoming_data);
}


void loop(){

}


void configure_FTP(){

    sendATcommand("AT+SAPBR=3,1,"Contype","GPRS"", "OK", 2000);
    sendATcommand("AT+SAPBR=3,1,"APN","APN"", "OK", 2000);
    sendATcommand("AT+SAPBR=3,1,"USER","user_name"", "OK", 2000);
    sendATcommand("AT+SAPBR=3,1,"PWD","password"", "OK", 2000);

    while (sendATcommand("AT+SAPBR=1,1", "OK", 20000) != 1);
    sendATcommand("AT+FTPCID=1", "OK", 2000);
    sendATcommand("AT+FTPSERV="ftp.yourserver.com"", "OK", 2000);
    sendATcommand("AT+FTPPORT=21", "OK", 2000);
    sendATcommand("AT+FTPUN="user_name"", "OK", 2000);
    sendATcommand("AT+FTPPW="password"", "OK", 2000);

}


void uploadFTP(){

    sendATcommand("AT+FTPPUTNAME="file_name"", "OK", 2000);
    sendATcommand("AT+FTPPUTPATH="/path"", "OK", 2000);
    if (sendATcommand("AT+FTPPUT=1", "+FTPPUT:1,1,", 30000) == 1)
    {
        data_size = 0;
        while(Serial.available()==0);
        aux = Serial.read();
        do{
            data_size *= 10;
            data_size += (aux-0x30);
            while(Serial.available()==0);
            aux = Serial.read();
        }
        while(aux != 0x0D);

        if (data_size >= 100)
        {
            if (sendATcommand("AT+FTPPUT=2,100", "+FTPPUT:2,100", 30000) == 1)
            {
                Serial.println(sendATcommand(test_str, "+FTPPUT:1,1", 30000), DEC);
                Serial.println(sendATcommand("AT+FTPPUT=2,0", "+FTPPUT:1,0", 30000), DEC);
                Serial.println("Upload done!!");
            }
            else
            {
                sendATcommand("AT+FTPPUT=2,0", "OK", 30000);
            }
        }
        else
        {
            sendATcommand("AT+FTPPUT=2,0", "OK", 30000);
        }
    }
    else
    {
        Serial.println("Error openning the FTP session");
    }
}

void downloadFTP(){

    int x = 0;

    sendATcommand("AT+FTPGETNAME="file_name"", "OK", 2000);
    sendATcommand("AT+FTPGETPATH="/path"", "OK", 2000);
    if (sendATcommand("AT+FTPGET=1 ", "+FTPGET:1,1", 30000) == 1)
    {
        do{
            if (sendATcommand2("AT+FTPGET=2,50", "+FTPGET:2,", "+FTPGET:1,", 30000) == 1)
            {
                data_size = 0;
                while(Serial.available()==0);
                aux = Serial.read();
                do{
                    data_size *= 10;
                    data_size += (aux-0x30);
                    while(Serial.available()==0);
                    aux = Serial.read();
                }while(aux != 0x0D);

                Serial.print("Data received: ");
                Serial.println(data_size);

                if (data_size > 0)
                {
                    while(Serial.available() < data_size);
                    Serial.read();

                    for (int y = 0; y < data_size; y++)
                    {
                        incoming_data[x] = Serial.read();
                        x++;
                    }
                    incoming_data[x] = '';
                }
                else
                {
                    Serial.println("Download finished");
                }
            }
            else if (answer == 2)
            {
                Serial.println("Error from FTP");
            }
            else
            {
                Serial.println("Error getting the file");
                data_size = 0;
            }
        }while (data_size > 0);
    }
    else
    {
        Serial.println("Error openning the FTP session");
    }
}




void power_on(){

    uint8_t answer=0;

    // checks if the module is started
    answer = sendATcommand("AT", "OK", 2000);
    if (answer == 0)
    {
        digitalWrite(onModulePin,HIGH);
        delay(3000);
        digitalWrite(onModulePin,LOW);

        while(answer == 0){     // Send AT every two seconds and wait for the answer
            answer = sendATcommand("AT", "OK", 2000);
        }
    }
}


int8_t sendATcommand(char* ATcommand, char* expected_answer, unsigned int timeout){

    uint8_t x=0,  answer=0;
    char response[100];
    unsigned long previous;

    memset(response, '', 100);    // Initialize the string

    delay(100);

    while( Serial.available() > 0) Serial.read();    // Clean the input buffer

    Serial.println(ATcommand);    // Send the AT command


        x = 0;
    previous = millis();

    // this loop waits for the answer
    do{
        if(Serial.available() != 0){
            // if there are data in the UART input buffer, reads it and checks for the asnwer
            response[x] = Serial.read();
            //Serial.print(response[x]);
            x++;
            // check if the desired answer  is in the response of the module
            if (strstr(response, expected_answer) != NULL)
            {
                answer = 1;
            }
        }
    }
    // Waits for the asnwer with time out
    while((answer == 0) && ((millis() - previous) < timeout));

        return answer;
}

int8_t sendATcommand2(char* ATcommand, char* expected_answer1,
            char* expected_answer2, unsigned int timeout){

    uint8_t x=0,  answer=0;
    char response[100];
    unsigned long previous;

    memset(response, '', 100);    // Initialize the string

    delay(100);

    while( Serial.available() > 0) Serial.read();    // Clean the input buffer

    Serial.println(ATcommand);    // Send the AT command


        x = 0;
    previous = millis();

    // this loop waits for the answer
    do{
        // if there are data in the UART input buffer, reads it and checks for the asnwer
        if(Serial.available() != 0){
            response[x] = Serial.read();
            x++;
            // check if the desired answer 1 is in the response of the module
            if (strstr(response, expected_answer1) != NULL)
            {
                answer = 1;
            }
            // check if the desired answer 2 is in the response of the module
            if (strstr(response, expected_answer2) != NULL)
            {
                answer = 2;
            }
        }
        // Waits for the asnwer with time out
    }while((answer == 0) && ((millis() - previous) < timeout));

        return answer;
}


 


Leave a comment
  1. hi, I need a help. I am using SIM800 to upload .txt file to FTPS server. SIM800 support SSL. But the module not connecting to server. it gives +FTPPUT:1,64 (timeout error) only . I am using AT+FTPSSL=2(explicit SSL). Anyone have any idea please help me. Reply
  2. Hi, Is there any way to avoid to hardcode the filename used when uploading? I would like to change the filename for each time i upload but im unsure how to do this. Do you have ant suggestions? Reply
  3. Hi, after “Now send AT+FTPPUT=1 and wait for +FTPPUT:1,1 after which you need to send the content of file to be uploaded”, I wait a lot of time I receive “OK” but “+FTPPUT:1,1,….” almost never (I seen only 2 or three time), can You help Me ? Reply
  4. Hi guys i need a help regarding FTP protocol.My objective is i need to transmit the .txt file from my GPRS (SIM-900)modem to web server.For that i followed some FTP AT commands as dms said. There i succeed to send the file from modem to web server.But here i faced a small problem i.e first i sent a .txt(data.txt) file as a name then after i need to enter some data to that file.But for my condition i don’t want to write the data again why because the file is already filled with data.Now i need to read that data.By using ftp get .I tried this but i didn’t read any thing back just it shows AT+FTPGET:2,0. How to send the .txt file with some information.Not required to enter in the terminal. Reply

Leave a Reply